red roll stands

I built these for a job in New Hampshire.  I wanted something collapsible that I could take apart and put into a gang box.  I also needed them to be able to be reassembled quickly and easily with a minimum of hardware.  I wanted to be able to drop the pipe into the stand as opposed to inserting it through the frame.

I used some skids which I cut down to size. I started by screwing a piece of plywood to the top of each then I screwed the 4x4s to that.  After that it is just the two pieces which cross there, they are secured at three points with carriage bolts and wing nuts.  I built two of them.  The big UHMW shields and shaft collars turned out to be unnecessary as you can see in the video which made roll change even quicker.