I built these from scrap 2x4 and plywood. The plywood was probably pulled off some kind of crate that I sawed into pieces. I wanted something to hold my Pyrex collection and the corner seemed like a natural fit since I am low on space. I planned on putting an overwhelming four toggles in each. I did have a problem getting all four in, I hadn't thought about that once two are in it is difficult to align the other two. I did get that done but I had a much larger problem with one of them where the clearance was limited behind the drywall so I only got 2 of 4 in. A few months later I tore it all out and redid that shelf and got a third one in and was satisfied that it was now secure.
No comments:
Post a Comment